SMGSmoke
Managing Gap
Technology

How the SMG filtration system works

After the plant’s existing primary filter system, the flue gas is routed through the system, where it comes into contact with a water suspension of a natural mineral sorbent. The most hazardous components of the flue gas bind to the sorbent and are permanently removed from the gas stream, reducing their concentration in the outgoing gas. The primary focus is SO₂, and we are also investigating NOx and CO.

01 — The principle in four steps

The principle in four steps

01

Flue gas leaves the plant and passes through the existing dust removal system.

02

The gas enters the SMG system and contacts the mineral sorbent suspension.

03

The suspension circulates through the system and the pollutant concentration falls.

04

Cleaner gas leaves the system.

SMG module visualisation
02 — Design

Design

The basic unit is a module in which the gas is cleaned. For plants that run continuously over long periods, the unit is built with two modules, so one can operate while the other is serviced. Several units can be connected in series or in parallel, depending on the user’s needs.

Development goals

  • Lower cost than conventional solutions
  • Installation without major changes to existing equipment
  • No scaling or deposits, unlike limestone-based systems
  • Neutral pH: the sorbent buffers the solution and prevents acidification
  • Maintenance without aggressive acids
  • Maintenance in minutes instead of days
  • Safe disposal of spent sorbent
  • Potential to treat several pollutants
03 — Development status

Development status

Laboratory prototype

built and tested

MVP

in development

Industrial prototype

planned

On-site pilot

planned
Results were obtained under laboratory conditions. We will confirm performance under industrial conditions through the pilot programme.
Intellectual property. The innovation is the subject of a patent application and is developed in cooperation with the Vinča Institute and IRM Bor.
Laboratory prototype

Running a plant with SO₂ emissions? Test SMG on your site.

Pilot programme →